Caravan Roadworthy and Gas Certificate Sunshine Coast
Mobile Caravan Roadworthy and Gas Certificate Sunshine Coast
Mobile Caravan Safety Certificate Sunshine Coast
We come to you, 1 person will be taking care of your Caravan Roadworthy Certificate Sunshine Coast and Caravan Gas Certificate.
Are you Buying or Selling a Caravan / Trailer? Need a Safety Certificate and Gas Certificate?
Call Michael Today - 7 Days a Week
0461515525
Do you need a Mobile Caravan Safety Certificate and Caravan Gas Certificate at the Sunshine Coast
Transferring Ownership of a Current Registration or Applying for a New Registration to Queensland then you will need Caravan Safety Certificate also known as a Caravan Roadworthy Certificate and this is required when the caravan or trailer fully loaded weight (ATM) is between 751kg - 4500kg
Mobile Caravan Safety Certificate Sunshine Coast and Mobile Caravan Gas Certificate
We come to you, 1 person will be taking care of your Caravan Safety Certificate and Caravan Gas Certificate.
Mobile Caravan Safety Certificate Sunshine Coast
We can offer this as a mobile inspection and a Gas Certificate within the Sunshine Coast and other regions
We are a Small Family Business - That means Exceptional Customer Service
Mostly Same or Next Day service - Mobile Caravan Safety Certificate Sunshine Coast
We are fully licensed to carry out a Mobile Safety Certificate Sunshine Coast and Trailer Roadworthy Inspections
Are you Buying or Selling a Caravan / Trailer? Need a Safety Certificate Sunshine Coast and Gas Certificate?
Call Michael Today - 7 Days a Week - 0417 798 934
Do you need a Mobile Caravan Safety Certificate Sunshine Coastand Caravan Gas Certificate?
Transferring Ownership of a Current Registration or Applying for a New Registration to Queensland then you will need Caravan Safety Certificate also known as a Caravan Roadworthy Certificate and this is required when the caravan or trailer fully loaded weight (ATM) is between 751kg - 3500kg
fWhen Booking a CARAVAN ROADWORTHY - On Site Requirements for the Mobile Safety Certificate Sunshine Coast and Camper Trailer Roadworthy Certificate
- Registration Certificate or Renewal Paper (if the trailer is registered)
- Level Ground for the Inspection to be performed on (concrete or a hard surface is preferred)
- 1 meter access around the outside of the trailer
- All compartments and doors to be unlocked
- To pass Inspection the Trailer or Caravan MUST have all of the Clearance, Tail and Stop Lights working and it must have a Number Plate Light.
To make the process much easier, if the owner does a few simple checks over the trailer, like just checking Lights and tyres are in working order
When your Trailer or Caravan Safety Inspection is under way, If the need arises, most repairs can be performed on site to pass inspection; Safety Certificate and Gas Certificate.
To PASS The Caravan or Camper Trailer must comply to the
Vehicle Standards Bulletin VSB1 for light trailers
Basic Caravan Roadworthy Requirements
For Caravan and Trailers 751kg to 2000kg Gross Trailer Mass (GTM)
- Minimum of 1 axle with brakes fitted to the forward axle
- Tyres to be load ratted to the Fully Loaded Weight Aggregate Trailer Mass (ATM)
- Minimum of 1 load rated safety chains equal to or more than the Aggregate Trailer Mass (ATM)
For Caravan and Trailers 2001kg to 3500kg Gross Trailer Mass (GTM)
- Brakes on all wheels
- Brake Away System (BrakeSafe) fitted to trailer, which will cause all brakes to actuate when the switch is tripped.
- Minimum of 2 load rated safety chains equal to or more than the Aggregate Trailer Mass (ATM)
Things we check
All lights must work (stop, tail, forward markers, rear markers, number plate and indicators), lights are free from cracks in the lens, light lenses are not faded from the sun, no water inside the light or lens, reflectors are fitted to the front sides and rear of the caravan or trailer, body is secured to the chassis correctly, walls and floor are free from timber rot, chassis and a frame are free from any structural impairing rust, safety chains are rated and secured to the a frame permanently, coupling is rated and secured to the a frame properly, tyres have more than 1.5mm tread across the whole tyre, tyres are free from any cracks in the side wall and in the tread pattern, brakes are within tolerance and in safe working order, brake pads or shoes have at least 0.8mm of braking element left, bearing tension is within tolerance with no excessive play from side to side, chassis number to be on a frame if manufactured prior to 1988, compliance plate with VIN number fitted to the caravan or trailer if manufactured after 1988.
Recently we have found upon a few gas inspections quite a high number of jobs done here in Queensland by licensed gas fitters are still wrong, mainly not fitting compliance plates either because they have a restricted service licence and can not take on any modification work or they hold an open gas licence but still not doing the job correctly.
If you’re having any modification work or a new fit out the owner of the caravan / camper must always check the persons gas licence has no restrictions and the gas fitter is filling out the paperwork correctly
Here is a little job we did this week, a Caravan Roadworthy and Gas Certificate Sunshine Coast Upon inspection I found that the brakes were not working at all, and as you can see here the old brakes have been dragging and are completely burnt out!
With in a day we had the new backing plates fitted and the bearings serviced ready for the new owner and the paperwork all sorted as well.
For all your caravan and camper trailer needs,
Contact Mike - 0461 515 525
When was the last time you looked under your caravan or trailer? Upon inspection on this caravan that was only a few years old find a quite shocking tear through the tyre.
This can happen just with age when the rubber dries out it starts to crack and your small crack will then turn into something like this
Please contact Michael for any advise on 0461515525
Caravan Roadworthy and Gas Certificate Sunshine Coast
When was the last time you had your Caravan inspected? Is everything still in working order?
This Caravan apparently had an inspection 2 years ago, meaning the customer was under the assumption that everything was fine but suffering brake failure caused by the tow vehicles brake controller constantly dragging the brakes, as you can see here they have gotten that hot even the magnets have melted.
For all your Caravan Pre Purchase inquiries please contact
Mike - 0461515525
Caravan Roadworthy and Gas Certificate Sunshine Coast
If you’re going away you should consider simply looking under your caravan.
Look for things like cracks in welds, that the wiring and water pipes are all where they should be.
Selling your caravan and needing a Roadworthy?
Things like leaking shock absorbers will affect your Caravan Roadworthy and should be replaced ASAP.
Contact Mike on 0461515525 for all your Caravan Roadworthy and Gas Certificate Sunshine Coast requirements
19 Technology Dr, Warana QLD 4575
Caravan Roadworthy Certificate and Caravan Gas Certificate
Mobile Caravan Servicing
Caravan Pre Purchase Inspection
On Site repairs
Caravan Gas Fitting and Installations
1 Stop Mobile Caravan Shop
P.S. also check for a little black Queensland Gas Compliance plate which is a Gas Fitters Compliance Plate
For further information please contact myself Michael on 0461515525 or Gas safety Queensland